Welder Inverter Amp

220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma


220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma
220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma
220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma
220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma
220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma
220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma
220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma

220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma    220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma

14.96 x 13.58 x 6.69 inches. 13.58 inches x 14.96 inches x 6.69 inches.

Compact - portable - very capable quality welder that can run on either 110/115 or 220/230 volts which makes this a true workhorse with a completely portable footprint. Comes complete as pictured; ready for you to start welding.

Working voltage: 115V/230±15%; 30 to 155 Amp welding range; In MMA mode, this welder can be used as a very nice scratch arc TIG welder with optional accessories. Comfortably welds up to 1/4 in. Mild steel that is properly prepared using 220 volt input, in both MIG, flux-cored and stick welding. Feeds wire at 78 in.

Per minute and has infinitely adjustable wire speed and heat settings. This welder does not use tapped controls that are found in cheaper machines! This model uses an advanced compact IGBT inverter design with automatic overheat and over current welding protection.

The model 155 incorporates 2T/4T modes. 4T is useful if you have a long weld to do, as it saves you having to hold the trigger down the whole time. Great feature for out of position welding. This inverter MIG welder is both MIG, and a self-shielded flux-cored welding machine. The MIG155GSV is equipped with a unique electronic reactor circuit, which can precisely control the short-circuiting transfer and mixed transfer resulting in better performance than other welders for sale.

You will see the many advantages when you compare our products with silicon controlled welding machines and tapped welding. Our MIG welders incorporate a special advanced circuit designed to automatically sense if the user is actually welding or simply feeding a new roll of wire through the cable.

The circuit detects either high welding current flow or the lack of high current flow. If after approximately 5 seconds of checking at slow wire feed speed, if no welding current is detected, our welders automatically run the feed motor at full speed to help the user more quickly feed their new reel of wire through the cable.

Never try to set wire speed by pointing the torch into the air and pressing the trigger. That action will invoke our automatic high speed feed feature.

The Weldpro 155 series are also portable, energy-saving, and electromagnetic noise-free. Besides, we stand by our products. They spatter less, have easier arc starting, a deep welding pool, and a high duty cycle that you will appreciate. Remember our support is always available to help and answer your questions. We guarantee against any defective or misrepresented products.
220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma    220V/110V MIG155 AMP INVERTER MIG/STICK ARC WELDER with DUAL VOLTAGE Welding Ma