3 in 1 Welding Machine IGBT DC Inverter 135Amp MIG/MMA Welder 110V Flux Mig/Sti

  

3 in 1 Welding Machine IGBT DC Inverter 135Amp MIG/MMA Welder 110V Flux Mig/Stick/ Gass MIG. 19.45 x 12.83 x 8.66 inches. 12.83 inches x 19.45 inches x 8.66 inches.

The 135Amp MIG welder that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA. The machine is delivered ready for operation without adjustments with 0.8 mm diameter filler wire. Also, 0.6 mm, 0.9 mm or 1.0mm solid wire or cored wire can be used as filler wire.

Adjusting the welding power according to sheet thickness affects simultaneously both wire feed speed and amount of current lead to the wire. This is a good starting point for welding in different operating situations. It's suitable for both hobby and professional use. IGBT power device with unique control mode improves the reliability of welding machine.

The flux core welder works more efficiently, reduces energy loss, and welds better. 1MIG/MMA Welder; 18.2ft CCA cable with 200A Electrode holder; 18.2ft CCA cable with 200A Earth clamp; 18.2ft Power cable with American standard plug; 18.2ft fixed MIG; 1slag hammer; 1User Manual.

The machine has passed a variety of professional tests and certifications before leaving the factory. The welding gun has an overheating protector which prevents operation when the machine is overheated.

The machine is also protected from too low or too high supply voltage. We guarantee against any defective or misrepresented products.