6 IN 1 Aluminum MIG Welder Inverter 250AMP Gasless 110V 220V ARC TIG MIG Welding

  

: Support MIG GAS, MIG WITHOUT GAS LIFT TIG, MMA. Multi-function mode to start your welder's journey. MIG: 20-250A; MMA: 20-180A; LIFT TIG : 20-200A. With the synergic function, these parameters can be pre-programmed according to the diameter of the wire and the combination of gas and metal type to facilitate welding and ensure optimal welding. : This welder can weld aluminum, iron, carbon steel, stainless steel, etc.

This mig welder came with qualify accessories: MB15 Mig Gun, graphite wire feed tube, earth clamp, electrode holder, welding brush/ hammer combo, hose clamps, gas tube and US plug. This welder features a easy carrying handle, compact design, easy for transportation and storage. : 2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates.

: HZXVOGEN gasless flux cored wire welder has two wire feeding wheels 0.6/0.8 and 1.0/1.2. It can be matched with 1kg -5kg diameter 0.6/0.8/0.9/1.0 strong core welding wire. 2.5/3.2/4.0 acid electrodes (such as 6018/7013 electrodes). 2T/4T function supports long term welding. We will give you a quality service.

We have professional maintenance agents in the United States. Why choose HZXVOGEN 110V/220V 250Amp MIG Welder Machine? Support Gasless Flux Core Wire MIG Weld and Gas MIG Weld, Stick Weld, Spot Weld and Lift TIG Weld(Note: TIG torch need purchasing separately). The voltage & wire feeding speed can change automatically by adjusting amperage.

Also you can adjust the welding current according to your welding habit. Provides you with accurate data display for increased control and reliability. Built-in hot start, arc-force, anti-stick.

Can be used with MIG gun with graphite wire feed tube for aluminum function. Up to 250 A output that allows to weld mild steel up to 9/32 in plate. Automatic compensation for voltage fluctuation, over-current protection, over-load protection and over-heating protection. 10 sets of parameter data can be set for each welding mode, making the next welding more convenient. Equipped with dual voltage 110V/220V input power supply and adapter, which can automatically match the voltage.

The cooling fan only runs when working, which effectively reduces noise, saves energy and prolongs the life of the welder. Power Supply: 110V/220V(±15%) 50/60 Hz. MIG Welding Current(110V): 20-180A. MIG Welding Current(220V): 20-250A. MMA Welding Current(110V): 20-160A.

MMA Welding Current(220V): 20-180A. TIG Welding Current(110V): 20-180A. TIG Welding Current(220V): 20-200A. Flux Core MIG Wire: 023/. Applicable Electrode: Ø1.6-4.0 mm.

Electrode Type: AWS E6013, E7018, E6011, E6010, etc. Rectification and filtering stable output. Easily implement current control to reduce energy consumption. Choose the mode of - MIG GAS. Connect the earth to the negative(-).

Change the graphene conduit in the gun. Change the wire feed roll into" U" type.

Change your welding wire into aluminum. Parameter Preset and Memory Storage. No need to repeat welding settings.

MIG250II welding machine supports preset 40 groups of parameters (MIG/MMA/Lift TIG, each mode can be set to 10 groups). It provides an easy arc start, stable welding arc, deep molten pool, minimum spatter beautiful weld shape. Big Space In The Machine. Big enough to handle 2 pounds (D100) and 10 pounds (D200) rolls of wire.

Suitable for all kinds of welding requirements. What's in the box? 1 HZXVOGEN MIG250 Multiprocess Welder. 1 110V-220V 30Amp Adapter Cord. 1 10ft MIG Welding Torch.

1 5ft Welding Ground Clamp. 1 6ft Welding Electrode Holder. 1 10ft Shielding Gas Hose. It is very suitable for all tasks in construction, agriculture and house workshop DIY, such as garden fencing, roofing, bicycles, welding aluminum, iron, carbon steel, stainless steel, mild steel and cast iron, etc.