Amico MTS-205, 205-Amp Welder, MIG/MAG/Lift-TIG/Stick Arc DC Inverter Welding

  

Is the perfect choice for projects and repairs around the home and auto body shop. This welder can work well with solid wire and flux wire as well as aluminum wire. It also has the TIG and STICK function, can weld steel and stainless steel perfectly.

The welder output range 10-205 amp. It uses standard flux-core wire(E71-gs) or steel wire 0.6-1.0mm, and aluminum wire. It has settings to easily adjust the output according to the thickness and changing the polarity according to the type of wires.

MTS-205 multifunction 3-in-1 MIG/TIG/Stick Arc professional combo welder, capable of welding up to 1/2 aluminum, alloy, mild steel, weld steel, stainless steel, copper and cast Iron. It is the perfect choice for projects and repairs around the home and auto body shop. It can work well with aluminum wire, solid wire and flux cord wire, it also has the TIG Torch and STICK function, can weld steel and stainless steel perfectly.

Advanced IGBT technology, featured wave-form control system, perfect waveform of volt and amp during, short circuits and arc burning cycles. Synergic controlled, very easy and simple operation. Very clear wire melting droplet transfer, very few spatters. Fast, precise, clean arc ignition and arc ending. 100-240 Voltage Inputs, means you can plug into any common power supply. Automatic compensation for voltage fluctuation, over-voltage protection, under voltage protection, over current protection, over load protection, automatic temperature control, fan dormancy, steeples amperage control. Using high quality wire feeding machine(iron) to ensure smooth wire feed, especially when using aluminum wire welding aluminum, with 2T/4T torch control. Automatic control gas solenoid valve has been installed inside the machine. All the accessories and interface using the US standards.

Welder Type: 3-IN-1 MIG/TIG/STICK Combo Welder. Output Terminal Type: Direct Wire. Power Supply: AC 100V-240V/Single Phase/50-60Hz.

115V: 35.0A(MIG)/21.5A(TIG)/35.7A(STICK). 230V: 27.0A(MIG)/15.5A(TIG)/24.8A(STICK). 115V: 45.2A(MIG)/27.7A(TIG)/46.0A(STICK). 230V: 34.8A(MIG)/20.0A(TIG)/32.0A(STICK). Nominal DC Open Circuit Voltage (OCV): 56V. Welding Output, 104F(40C), 10 min(230V).

MIG: 205A/24.2V, TIG: 170A/16.8V, STICK: 170A/26.8V. MIG: 60% at 205A, 100% at 158A. TIG: 60% at 170A, 100% at 132A. STICK: 60% at 170A 100% at 132A.

Product Size: 13.4 x 9.1 x 17.3 in. Product Weight: 27.0 lbs. Package Size: 24.2 x 14.2 x 18.1 in. Package Weight: 50.0 lbs. MIG gun and cable assembly.

TIG Torch gun and cable assembly. 8 feet air hose use for Co2 and Argon connect. Aluminum wire use for MIG weld. Steel wire use for MIG weld. 4 electrodes use for Stick/Arc Weld. 1 V-drive roll for 0.023" & 0.030" (0.6mm & 0.8mm). 1 U-drive roll for 0.030" & 0.035" (0.8mm & 0.9mm). 1 V-drive roll for 0.035" & 0.040" (0.9mm & 1.0mm).

Quick manual & Owners Manual.